STA Synchronous Thermal Analyzer

What is STA synchronous thermal analyzer and what can it measure?

The STA synchronous thermal analyzer combines the thermogravimetric analyzer TG with the differential scanning calorimeter DSC or differential thermal analyzer DTA. Using the same sample in the same measurement, mass changes and absorption and release heat changes can be obtained at the same time. Information greatly improves the efficiency of experiments and is therefore widely used in many industries.

What can the STA synchronous thermal analyzer measure?

1. In TG (thermogravimetric analysis), the temperature of weight changes caused by phenomena such as decomposition, oxidation, dehydration, heat resistance, evaporation and kinetic analysis can be determined.
2. In DSC (differential scanning calorimetry), additional information on glass transition, melting, crystallization, specific heat capacity, chemical reactions, and TGA weight loss/gain can be measured.

What are the applications of STA synchronous thermal analyzer?

The STA synchronous thermal analyzer can provide important data basis for the research, development and quality control of different materials, so it is mainly suitable for research and general application scenarios of polymers, food, pharmaceuticals, electronic components, semiconductor materials, metals and petroleum.

What are the advantages of STA synchronous thermal analyzer?

Take Shuoboda STA2000 synchronous thermal analyzer as an example. The measured temperature range is room temperature ~ 1200°C. It is equipped with two channels of gas and automatic switching. It adopts multi-stage temperature settings to facilitate the temperature measurement of different materials. It uses intelligent The software collects the changes of samples at different temperatures in real time, and then performs spectrum analysis. The top-opening furnace body design structure facilitates testing, and double-layer heat insulation is used to avoid the impact of heat radiation on the weighing system. Color touch screen display, the display information is comprehensive and clear, and the operation is simple.

How to operate the STA synchronous thermal analyzer?

Put the sample into an empty crucible, put another empty crucible into it for reference, put the two crucibles on the balance in the furnace, set the temperature, heating rate and other parameters, and then click the software Real-time collection is performed, and then after the experiment is completed, the spectrum is obtained for analysis. For more product information, please contact us.