TGA-103 RT ~1350°C Thermal Gravimetric Tester

RT ~1350°C Thermal Gravimetric Tester

Thermal Gravimetric Analyzer operation video

Shuoboda Thermal Gravimetric Analyzer TGA software operation video

Product introduction

Thermal gravimetric analyzer (TGA) is used in TG, temperature, temperature or cooling process, observing the quality with temperature or the change of time, the purpose is to study material thermal stability and components. It is widely used in plastic, rubber, coating, drugs, catalyst, inorganic materials, metal materials and composites fields of research and development, optimizing process and quality control.

Test and research material characteristics

Thermal stability, decomposing process, adsorption and desorption, oxidation and reduction, ingredients quantitative analysis, additives and filler influence, moisture and volatiles, reaction kinetics.

Structural advantages

• The furnace body is heated by double-row winding of precious metal nickel-chromium alloy wire, which reduces interference and is more resistant to high temperatures.
• The tray sensor is made of precious metal nickel-chromium alloy, which has the advantages of high temperature resistance, oxidation resistance, and corrosion resistance.
• The power supply, circulating heat dissipation part is separated from the host, reducing the influence of heat and vibration on the micro-thermal balance.
• It adopts an open-top structure, which is convenient to operate. It is difficult to move the furnace body up to place the sample, and it is easy to cause damage to the sample rod.
• The host uses a water area constant temperature device to isolate the thermal influence of the heating furnace body on the chassis and the micro-thermal balance.
• The furnace body can be replaced according to customer requirements

Controller and software advantages

• Using imported 32bit ARM processor Cortex-M3 core, sampling speed, processing speed is faster.
• 2.24bit four-channel sampling AD collects DSC signal, TG signal and temperature T signal.
• The power supply and water circulation part are individually controlled by 8bit single-chip microcomputer to separate the host and the cooling part without interfering with each other, but the two are closely connected, and the cooling part is controlled by the host.
• The USB two-way communication is adopted between the software and the instrument to fully realize remote operation. The parameter setting of the instrument and the operation and stop of the instrument can be carried out through the computer software.
• 7-inch full color 24bit touch screen, better man-machine interface. TG calibration can be achieved on the touch screen

TGA-103 Thermal Gravimetric Tester Technical Parameters

Model	TGA-103
Temperature range	RT ~1350°C
Temperature resolution	0.01 °C
Temperature fluctuation	±0.1°C
Heating rate	1 ~ 100 °C / min
Cooling rate	1 ~ 20 °C / min (optional cooling system)
Temperature control mode	Heating, constant temperature and cooling
Program control	It can set muti section heating and constant temperature and five sections at the same time
The cooling time	15min  （1000°C ~ 100°C）
Balance measuring scope	0.01mg ~ 3g (Can be extended to 30g)
Sensitivity	0.01mg
Constant temperature and time	0 ~ 300min (set arbitrarily)
Display	Liquid crystal display (LCD)
Atmosphere	inert, oxidizing, reducible, static and dynamic
Atmosphere device	Built-in gas flow meter, including switch two-way gas and control flow volume (Atmosphere: inert, oxidizing, reducing, static, dynamic)
Software	Intelligent software can record TG curves, process data, and print experimental reports. TGD/TG/mass/percentage coordinates can be switched at will
Data interface	USB interface, special software (irregularly free upgrades)
Power	AC220V 50Hz
Dimensions	500*400*430 mm

Sample’s relationship between the TGA, time, and temperature

Sample’s relationship between thermal gravimetric (TGA), enthalpy change (DSC), time, temperature

Packing List

Item name	Qty
Host	1 set
software	1 copy
power cord	1 pc
data cable	1 pc
Sample crucibles	100 pcs
10A fuse	2 pcs
manual	1 copy
Gas pipes	2 pcs
Tweezers and sample spoon	1 set

Free sample test

R&D Laboratory

On-site training & technical guidence

Exhibition product disply

Adequete supply

Production work shop