RAD7 Smart Radon Detector & Monitor

RAD7 Smart Radon Detector & Monitor

Product introduction

RAD7 Smart Radon Detector & Monitor is a portable detector with the shortest response and recovery time on the market, sniffer type and continuous operation. The operation is simple, according to the prompts of the microcomputer, the measured radon and thoron concentrations are displayed by the spectrum curve, and the data can be output by an infrared printer. The humidity of the sampled air is reduced by the drying device to improve the accuracy of the test results. Beeps can be set for radon and thoron counts to be aware of high pollution areas. A variety of accessories are available to measure radon in air, radon in soil and radon in water. The RAD-7 radon meter measures the US EPA action level concentration of 4pCi/L in just 1 hour.

Features

• Equipped with corresponding accessories can measure radon in air, soil and water at the same time

• The measured radon and thorium can be displayed in the form of spectrum curves

• Electronic tester with the fastest response and recovery time on the market

• Simple operation, follow the prompts of the microcomputer

• Lightweight at only 11 lbs

• Meets US EPA operating standards of 4pCi/L for 1 hour

• Can display and print radon level values that are continuously updated from start to test

• The test results can be displayed on the computer, printed and exported, and the data can be downloaded

• Spectrum curves demonstrate the accuracy of the instrument's field operation

Technical Parameters

• Measurement Modes: Continuous radon monitoring, long or short time radon level screening, and suction tube (nozzle) search for radon and thoron influxes.

• Measurement object: continuous monitoring: 0.4cpm/pCi/L suction: 0.2cpm/pCi/L;

• Measuring range: 0.1-20000pCi/L (3.7Bq/m3-740000Bq/m3)

• Storage capacity: 1000 previously measured radon concentrations and related data. It can be read on the LCD screen, printed, or downloaded to a PC, and the data simultaneously displays the high value, low value, average value and standard deviation of the radon concentration;

• Working principle: use electrostatic method to guide alpha emitter, and then do energy spectrum analysis;

• Built-in air pump: the standard value of the flow rate is 1 L/min (measured at the air inlet), and the air inlet and outlet ports are provided on the pump;

• LCD Display: Two lines of 16 characters (numbers) for easy reading.

• Audible alarm: Indicates the location and concentration of radon and thoron, which can be turned on or off.

• Power supply: AC/battery powered, the battery is 5AH 6V. When connected to AC power, it will automatically charge.

• Printer: HP HP82240A

• RS232 interface: for connecting computer or MODEM

• Operating environment: Temperature: 3°C-40°C Humidity: 0-100% (non-condensing)

• Weight and size: 5Kg; 24×19×27cm

• Shell Material: High Density Polyethylene

• Optional accessories: accessories for measuring radon in water and accessories for measuring radon in soil

• Basic configuration: RAD-7 main unit, power cord, shoulder strap and key, printer, 3 rolls of printing paper, printer adapter, 6 air inlet filters, 1 dust filter, 3 vinyl tubes, large drying tube , small drying tube, desiccant, built-in rechargeable battery, PC data software and computer connection line, Chinese and English manual.