Lubricating Grease Dropping Point Tester (Oil Bath)

BD-D566-4929A Lubricating Grease Dropping Point Tester (Oil Bath)

Product Introduction

BD-D566-4929A Lubricating Grease Dropping Point Tester (Oil Bath) is designed and made as per the National Standard GB/T4929 “Test Methods for Dropping Point of Lubricating Grease” and ASTM D566.

It is suitable to determine dropping point of lubricating grease.

Main technical features

1. The oil bath is composed of heat resistant beaker, heater and electric motor. The heating power can be adjusted continuously. The temperature in oil bath is uniform.。

2. Desktop structure. Easy to operate. 

Technical parameters

1. Power supply: AC 220V±10%, 50 Hz;

2. Oil bath: It is a beaker of 600 ml;

3. Grease cup: It is made of chromium-plated brass; inner diameter: Φ9.92mm; orifice: Φ2.8mm; height: 12 mm;

4. Test tube: a heat-resistant borosilicate glass test tube with rim; its inner diameter is 11.1 mm to 12.7 mm; there are three indentation for holding grease cup about 19 mm from bottom, equally spaced on the circumference.

5. Thermometer:

(1) Measurement range: -5~300°C;

(2) Scale division: 1 °C;

(3) Immersion depth: 76 mm;

(4) Total length: 390 mm;

6. Heater: 800 W;

7. Stirring motor: 60 RPM;

8. Ambient temperature: -10~+40°C;

9. Relative humidity: ≤85%;

10. Total power consumption: not more than 900 W;

11. Dimensions (m): 0.51*0.28*0.57

 Standard Accessories

No.	Item	Unit	Qty	Remarks
1	Grease cup	Piece	2
2	Test tube	Piece	2
3	Cork	Piece	3
4	Guide ring	Piece	2
5	Thermometer (-5°Cto 300 °C, and scale division is 1 °C)	Piece	3	The 3# is for dropping point
6	Metal rod	Piece	1
7	Power supply wire (250 V 6 A)	Piece	1
8	Stopping ring for thermometer (1#)	Piece	4
9	5 A fuse (Φ5×20)	Piece	2