Low Temperature Distillation Tester

BD-D86-6536C Low Temperature Distillation Tester

Product description

BD-D86-6536C Low Temperature Distillation Tester is designed and made as per the National Standard GB/T6536 “Test Methods for Distillation Characteristics of Petroleum Products at Barometric Pressure” and ASTM D86. It is suitable to determine distillation characteristics of gasoline, aviation gasoline, jet fuels, special boiling point solvent, naphtha, diesel oil, distillate and similar petroleum products.

BD-D86-6536C Low Temperature Distillation Tester is a low temperature petroleum products distillation test using single distillation system. It is a desired low temperature petroleum products distillation tester.

Main technical features

1.The electrics parts are controlled by controlling case.

2.The controlling case is made of cold rolled steel. It has an observation window and a built-in furnace. The electric part is at the lower section of the controlling case.

3.The furnace part is composed of SiC furnace base, heater of 1000W/220V, and SiC plate. The position of furnace can be adjusted by rotating the up and down knob on the controlling case, so that you can adjust the relative position of distillation flask and the opening of condensation tube. The heating power can be adjusted by rotating the voltage adjusting knob.

4.The refrigeration bath is made of stainless steel. It contains heating device, refrigeration device, temperature measuring device and stirring device. The stirring device is driven by a motor.

5.The dimension of condensation tube complies with GB/T6536.

 Technical parameters

1. Power supply: AC 220V±10%, 50 Hz;

2. Heating power of electric furnace: 1000 W;

3. Volume of graduated flask: 100 ml with scale division of 1 ml;

4. Distillation flask: 125 ml;

5. Thermometer: Total immersion rod type; scale ranges are -2 ~ +300°C and -2 ~ +400°C; Their scale divisions are 1 °C;

6. Movable plate for electric device: SiC plate; their hole diameters areΦ32, Φ38 and Φ50;

7. Temperature controller:

(1) Temperature controlling range:  0 ~ 60°C;

(2) Temperature controlling accuracy: ±0.5°C;

(3) Temperature display mode: Digitally displayed by a LED;

8. Ambient temperature: ≤+30°C;

9. Relative humidity: ≤85%;

10. Refrigeration system: new type of refrigerated compressor;

11. Total power consumption: not more than 2500 W;

12. Dimensions (m): 0.72*0.59*0.66

Standard Accessories

No.	Item	Unit	Qty	Remarks
1	Distillation flask (125 ml)	Piece	1
2	Thermometer (－2∼300)°C, (－2∼400)°C，scale division is 1°C	Piece	1 for each
3	Glass container (Φ100mm×240mm)	Piece	1
4	Silica gel stopper (3#)	Piece	2
5	Silica gel stopper (4#)	Piece	2
6	Silicon carbide board, pore size Φ32mm, Φ38mm, Φ50mm	Piece	1 for each
7	Graduated flask (100 ml)	Piece	1
8	Iron block	Piece	1
9	Test platform (pad under the test vessel)	Piece	1
10	6 A fuse (Φ5×20)	Piece	2
11	15A fuse (Φ5×20)	Piece	2
12	Stopping ring for thermometer (1 #)	Piece	4
13	Observation window glass	Piece	2
14	Condensate pipe outlet cover	Piece	2