Freezing Point Tester

BD-FP-2430 Freezing Point Tester

Product Introduction

BD-FP-2430 Freezing Point Tester is designed and made as per the National Standard GB/T2430 “Test Methods for Freezing Point of Jet Fuels”, and Industry Standard of Petrochemical SH/T0090 “Test Methods for Freezing Point of Engine Coolant”. If select different configurations, it can be used to determine freezing point of jet fuels, engine coolant and engine concentrate. It is multifunctional instrument.

  Main technical features

1. The instrument is made of stainless steel cold tank, double vacuum glass observation window, advanced temperature control technology, the lowest temperature up to -70 °C, temperature control accuracy of ± 0.5 °C, fully meet the GB / T 2430, SH / T 0090 freezing point test standard requirements.

2. Choose different configuration, can be respectively used in jet fuel, engine coolant and concentrate freezing point and other indicators, which is a multipurpose freezing point tester.

3. The instrument is a table structure, the working table is made of stainless steel, the design is simple, the appearance is beautiful, the use is convenient, and the matching is complete.

The greatest feature of this instrument are: the freezing point of jet fuel and engine coolant freezing point test combined; glass dewar cold trough, automatic sample mixing and cooling rapidly, accurate temperature control; stainless steel countertops and sprayed plastic chassis, durable.

Technical parameters

1. Power supply: AC 220V±10%, 50 Hz;

2. Cold trough: stainless steel trough with two layer glass observation window;

3. Controlling temperature of cold trough: +20°C ~ -70°C;

4. Temperature controlling accuracy: ±0.5 °C;

5. Bath stirrer: 6 W, 1200 RPM;

6. Refrigeration system: new type of refrigeration compressor;

7. Sample stirrer: By an electromagnetic stirrer; 0 ~ 120 RPM;

8. Ambient temperature: ≤30 °C;

9. Relative humidity: ≤85%;

10. Total power consumption: not more than 2000 W;

11. Dimensions (m): 0.64*0.64*0.88

 Standard Accessories

No	Item	Unit	Qty	Remark
1	Thermometer
	-37 °C ~ 2 °C, scale division is 0.2 °C	Piece	1	Thermometer
	-54 °C ~ -15 °C, scale division is 0.2 °C	Piece	1
	-80 °C ~ 20 °C, scale division is 0.5 °C	Piece	1
2	Large test tube (double wall)	Piece	2
3	Small test tube (double wall)	Piece	2
4	Small test tube(single wall)	Piece	2
5	Test tube stopper (small)	Piece	2
6	Test tube stopper (large)	Piece	2
7	Stopping ring for thermometer (1#)	Piece	2
8	Bath cover(One large and one small)	Piece	1 for each
9	Largetest tube seat	Piece	1
10	Smalltest tube seat	Piece	1
11	Sample automatic stirring device	Set	1	Installed by user
12	Stainless steel tube type agitator	Piece	2	One large and one small
13	Test tube holder	Piece	1	Installed by user
14	Cork stopper	Piece	1
15	Instruction Manual	Piece	1
16	Temperature Controller Instruction Manual	Piece	1
17	Product certification	Piece	1
18	Product warranty card	Piece	1