Professional Supplier of Laboratory Scientific Instruments
Professional Supplier of Laboratory Scientific Instruments
PRODUCT MODEL: SPD-501
Categories: Small Scale, Spray Dryer,Organic Solvent
Tags: Small Scale, Spray Dryer,Organic Solvent
The instrument can be placed on the experiment table, or SHUOBODA inert loop system SPD-501, featuring small size and convenient operation;
SPD-500 laboratory spray dryer has the basic type and the organic solvent type SPD-501 (with inert loop system). SPD-500 laboratory spray dryer is for aqueous solution, which can simply be updated to organic solvent type after equipped with SPD-501 inert loop system;
During experiments, the new spray atomizer would never be off-center in atomization, and there won’t be affected recovery rate by spraying on the bottle wall. The spray atomizer can change the spray site to improve the spray effect by moving up and down; notably, the spray atomizer has excellent adaptability to material with high viscosity and few blocking situation;
SPD-500 laboratory spray dryer standard tail gas dedusting equipment can reduce environmental pollution while effectively improving the yield, especially the yield of difficult recycle;
SPD-500 laboratory spray dryer is designed to ensure that all functions are simple to select and adjust, to quickly achieve the optimum conditions for spray drying. The operator can control the following functions:
The stainless-steel spray assembly consists of an inner tube for the liquid sample leading to a small diameter jet. An outer tube directs compressed air to the nozzle. All units are supplied with 0.7mm jets, other sizes are available as accessories. The spray assembly incorporates an automatic de-blocking device that prevents the jet nozzle from becoming blocked, the de-blocking needle is activated by an integral compressor. De-blocking is sometimes necessary with materials which may solidify or when large particles in suspension cause blockages in the jet.
Trusted by the users Over 1,500 customers of top universities, enterprises and research institutes use our mini spray dryer. And exported to more than 40 countries & regions such as the United States, Italy, South Korea, Mexico, Singapore, Canada, Malaysia, Chile and Russia.
| Model | SPD-501 lab spray dryer (with Inert Loop system for organic solvent) |
| Power | 2500W |
| Voltage | 220V,50/60 Hz |
| Atomizer material | SUS 316 Stainless steel |
| Evaporating Capacity | 500ml/h for water |
| Airflow | 0-330 m³/h |
| max. Input temperature | 200 ºC |
| Heater power | 1000W |
| Temperature precision | ±1 ºC |
| Spray gas | 4.2m³/h, 2-5bar |
| Nozzle jet | 0.7mm standard/(0.5/0.75/1.0/1.5/2.0mm available) |
| Nozzle type | Two fluid nozzle |
| Possible particle size range | 1-25µm |
| Mean Residence time | 1.0-1.5 sec |
| Operation mode | Automatic/Manual |
| Max. Sample feed | 1500ml/hr |
| Minimum sample volume | 30ml |
| Spray chamber material | SUS304 Stainless steel |
| Cyclone separator material | SUS304 Stainless steel |
| Receiving tank material | SUS304 Stainless steel |
| Body material | SUS304 Stainless steel |
| Seal of cyclone/cylinder | Silicone |
| Gas type | N2 (for solvent) or compressed air (for aqueous) |
| Sound | <60db |
| Dimensions | 800*550*900 (spray dryer) 900*800*900(inert loop) |
| Weight | 150KG |
| Display | 7-Inch LCD display for Heat, Spray, Pump, Air pressure, de-blocker frequency |
| Thermal protection | Blower does not stop until temp <90 ºC |
| Deblocking | Automatic |
| Inert loop (for organic solvents) | Yes |
SPD-500 laboratory spray dryer can be used in a wide range of applications where the production of a free-flowing powder sample is required.This technique has successfully processed materials in the following areas:
Experienced service team and strong production support team provide client worry-free order service.
If you are interested in any of our products or would like to discuss a customized order, Please feel free to contact us.
Contact Us