ASTM D93 PMCC Pensky-Martens Flash Point Tester

BD-D93-261 ASTM D93 PMCC Pensky-Martens Flash Point Tester

Product Introduction

BD-D93-261 PMCC Pensky-Martens Flash Point Tester is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens Closed Cup Method and ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester.

It is used to make determination of the closed cup flash point of the petroleum products.

Main technical features

This instrument is designed as per GB/T261 and ASTM D93.
The heating power is continuously adjustable. The power is shown visually by voltmeter. The temperature control mode is advanced and reasonable.
The structure is designed small and exquisite. The stainless-steel table board is beautiful and easy to clean.
Operation is easy. Test results are precise. It has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes.

Main technical specifications

Model		BD-D93-261
Power supply		AC (220±10%)V, 50Hz.
Heating device		The heating power is continuously adjustable from 0 W to 600W.
Heating rate		(1 ~ 12)°C/min; Controllable and adjustable.
Stirring rate		Procedure A: (90 ~ 120)RPM Procedure B: (250±10)RPM
Oil cup	Inner diameter	50.7mm ~ 50.8mm.
	Depth	55.7mm ~ 56.0mm
	The scribed line depth of capacity of testing oil	33.9mm ~ 34.3mm.
	Capacity of testing oil	about 70ml
Igniting device	Igniting source	gas (or other civilian fuels, the same below)
	Electric ignition. Gas flame diameter	3.2mm ~ 4.8mm
Thermometers		Mercury-in-glass thermometer. Specifications are as below
		(1)Scale -5°C ~ 110°C, division 0.5°C
		(2)Scale 20°C ~ 150°C, division 1°C
		(3)Scale 90°C ~ 370°C, division 2°C
Ambient temperature		≤ 35°C
Relative humidity		≤ 85%
Maximum power consumption		650W
Dimensions (m)		0.420.350.35

Standard accessories

No.	Item	Unit	Qty	Remarks
1	Thermometer -5 ~ 110 °C, each scale division is 0.5 °C	Piece	1	GB / T261-2008 Standard requirement
2	Thermometer 20 ~ 150 °C, each scale division is 1.0 °C	Piece	1
3	Thermometer 90 ~ 370 °C, each scale division is 2 °C	Piece	1
4	Driving flexible shaft	Piece	1
5	Latex tube Ф3 250mm	Piece	3	One for alternate
6	5A fuse (Ф5 × 20)	Piece	2
7	Thermometer adapter	Set	1
8	Thermometer liner (Cut suitable length of liner to wrap the lower end of the thermometer, so that the thermometer is just inserted into the thermometer adaptor)	Piece	5