5L~100L Double Layer Jacket & Triplex Glass Reactor

5L~100L HGR Series Double Layer Jacket & Triplex Glass Reactor

5L, 10L, 20L, 30L, 50L, 80L, 100L Explosion-proof types are optional

               

Features

• Temperature is digital setting and display, easy to operate, high precision of temperature control.
• High borosilicate glass has good physical and chemical properties.
• Can be used in wide temperature range from high temperature （300℃）to low temperature（-80℃）.
• Can work in constant pressure and vacuum, vacuum degree is below 0.095MPa in quiet situation.
• Digital display of mixing speed, , frequency conversion, and constant speed mixing system, work steadily.
• The sealing me thod and materials between mixer shaft ,PTFE mixing propeller （paddle）,and ketttle cover are Know-how of our company.
• Corrosion resistant discharge valve is without dead space design.
• The cooling or heating solution in the interlayer can be completely removed after reaction.The whole structure is novelty, practical and beautiful.

Explosion-proof motors

1. Adjust motor power According to the mixing material viscosity
2. Explosion-proof grade dIIBT4
3. Motor power is 180W, 90W, 370W
4. run without sparks

Explosion-proof standard GB3836

1. Explosion-proof mark dIIBT4, on behalf of: Explosion-proof electrical products for the type of explosion-proof, is the use of Class IIB place (Class) Do not, the ignition temperature of explosive gases T4 group.
2. Flameproof d GB3836.2 isolated ignition source exists
3. Explosion-proof electrical equipment, in accordance with the maximum test safety clearance (MESG) or minimum ignition current (MICR) to distinguish, Class II electrical equipment is divided sinto: IIA, IIB, IIC three categories.
4. According to the difference of ignition temperature of explosive gas mixture, the group is divided into six kinds of T1, T2, T3, T4, T5 and T6. The ignition temperature is expressed in t (℃).
5. T4 is: 135 ℃ <t ≤ 200 ℃; T1 is: 450 ℃ <t; T6 is: 85 ℃ <t ≤ 100 ℃

Reactor kettle body:

1. The kettle body volume is 5L, 10L, 20L, 30L,50L, 80L, 100L

2. The jacket volume is 1.6L, 3L, 6L, 10L, 16L, 24L, 30L

3. Jacket pressure ≤ 1.3Bar

4. The kettle body circulation inlet and outlet fluid are flange ports, Can be connected with domestic and foreign equipment

5. It can be between 200 degrees above zero and 80 degrees below zero temperature zone use

6. High borosilicate glass

Product advantages:

• High temperature - use working temperature up to 260 °C.
• Low temperature resistance - Good mechanical toughness; 5% elongation even if the temperature drops to -100°C.
• Corrosion resistance - inert to most chemicals and solvents. Resists strong acids, strong bases, aqua regia and various organic solvents.
• Weather resistance - The best aging life in plastic.
• High lubrication - The lowest coefficient of friction in solid materials.
• Non-adhesive - not afraid of chemical corrosion, long service life.
• Non-toxic - it is physiologically inert and there is no adverse reaction in the implant.

Specifications

Model		HGR-05D HGR-05T	HGR-10D HGR-10T	HGR-20D HGR-20T	HGR-30D HGR-30T	HGR-50D HGR-50T	HGR-80D HGR-80T	HGR-100D HGR-100T
Effective volume (L)		5	10	20	30	50	80	100
Jacketed volume (L)		1.5	3	6	10	16	24	30
Jacket heat transfer area (m²)		0.13	0.22	0.32	0.46	0.65	0.9	1.09
Condenser heat transfer area (m²)		0.12	0.2	0.3	0.3	0.3	0.5	0.5
Glassware Material		Pyrex 3.3	Pyrex 3.3	Pyrex 3.3	Pyrex 3.3	Pyrex 3.3	Pyrex 3.3	Pyrex 3.3
Holder Material		SUS 304	SUS 304	SUS 304	SUS 304	SUS 304	SUS 304	SUS 304
Temp. Tolerance (°C)		-80 ~ 200	-80 ~ 200	-80 ~ 200	-80 ~ 200	-80 ~ 200	-80 ~ 200	-80 ~ 200
Operation Pressure(Mpa)		Vacuum or atmospheric pressure
Motor	Power(W)	90	90	90	90	140	250	250
	Adjustment	Frequency Control
	RPM	50 ~ 500	50 ~ 500	50 ~ 500	50 ~ 500	50 ~ 500	50 ~ 500	50 ~ 500
Stirring port (Flange)		50#	50#	50#	50#	50#	60#	60#
Sensor port		24#	24#	24#	24#	24#	24#	24#
Condenser (Milling mouth)		35#	50#	50#	50#	50#	50#	50#
Liquid feeding		24#	34#	34#	34#	34#	34# * 2	34# * 2
Constant pressure funnel		29#	40#	40#	40#	40#	40#	40#
Solid feeding (Flange)		/	80#	80#	80#	80#	95#	95#
Outlet/Inlet interface		DN15	DN15	DN15	DN15	DN15	DN15	DN15
Seal Material		Teflon	Teflon	Teflon	Teflon	Teflon	Teflon	Teflon
Power Supply		220V  50HZ	220V  50HZ	220V  50HZ	220V  50HZ	220V  50HZ	220V  50HZ	220V  50HZ
Discharge valve	Description	No effusion side discharge valve
	Ground Clearance	400mm	400mm	370mm	360mm	320mm	400mm	350mm
Temp. sensor material		Stainless steel coated with fluorine , double corrosion
Stirrer		Clover rotary vane impeller, stainless steel PTFE Outsourcing
Dimensions(mm) (L*W*H)		460×380×1680	460×380×1680	520×520×2030	520×520×2150	570×570×2250	670L×670W×2600	670×670×2600
Remark		“D” means double layer glass reactor, “T” means tripe-layer glass reactor

Model “D” is double layer jacket type, model “T” is three-layer jacket type

Factory view