Automatic PMCC Flash & Ignition Point Tester

BD-D93-109 Automatic PMCC Flash & Ignition Point Tester

Product Description

BD-D93-109 Automatic PMCC Flash & Ignition Point Tester is designed and made as per the National Standard of People’s Republic of China GB/T261 “Test Methods for Flash Point of Petroleum Products (Closed Cup Methods)”.

It is suitable to determine closed cup flash point of petroleum products, which is described as the lowest temperature at which the mixture of a petroleum product sample vapor and air contacts flame and makes a flash when the sample is heated in a closed cup under the stipulated condition. And refer to ASTM D93.

Main technical characteristics

• It adopts colored LCD, man-machine conversation interface, and blank buttons. It has prompts menu and guide to choose method A or B, preset temperature, sample serial number, barometric pressure, test data and other parameters.
• It can simulate and show temperature-time curve. It has prompts for wrong operation and prompts to modify test data, test time, and other parameters.
• It can save test data of 100 groups. It is equipped with RS-323, and 485 computer ports, so it can save more test data when it is connected to a computer. Then you can also modify some parameters.
• It can calibrate the effect of barometric pressure to the test and calculate the modified value.
• Differential detection. It can modify system deviation automatically.
• It can open lid, apply flame, make detection, and print test data automatically. The test arm can be raised up and lowered down automatically.
• It uses an electron igniter for flame ignition. It has forcible wind cooling function.

1. Power switch    2. Printer     3. LCD     4. Operation buttons

5. Heating device (see 10~16 for detail)   6. Up and down arm

7. Oil Cup    8. Oil cup seat    9. Flame adjustment knob    10. Heating bath

11. Cup cover   12. Temperature sensor    13. Flash point detection sensor

14. Stirring shaft   15. Flame pilot   16. Flame application device

Working interface

Test interface

Printing result

Prompt interface

Technical parameters

Model	BD-D93-109
Measuring range	Room temperature~300°C
Resolution	0.1°C
Repeatability	≤2°C
Reproducibility	≤±4°C
Measured ignition	Automatic
Lift way	Automatic tilt
Display mode	Color screen
Detection mode	Automatic
Data output	Print
Ignition mode	Electricity, gas
Experimental cup number	Single cup
Operating environment	10-50°C
Relative humidity	85%
Power supply voltage	AC220V
Power frequency	50Hz±5%
Power rate	≤300W

Packing accessories

No.	Name	Unit	Quantity
1	Main unit	Set	1
2	Oil cup	Piece	1
3	Power supply wire (250V 6A)	Piece	1
4	Printing paper	Roll	1
5	Igniter	Piece	1