30L Automated Culture Media Preparator

MDP-30 Automated Culture Media Preparator

Automated Cell Culture Petri Dish Media Preparator Operation Video

Product Description

MDP-30 Automated Culture Media Preparator can be quickly prepared for sterilization, placed in a sterilizer and filled with water in a “water jacket system” (sleeve water between the sterilizer and the sterilizer cavity for efficient heat transfer), added to the medium Raw materials, ready to start the sterilization process. The medium can be suspended and dissolved directly in MDP preparator. Strong magnetic stirring ensures uniformity of mixing in the inner chamber and prevents condensation. The medium can be pre-dissolved in WATER BATH mode prior to sterilization. At the same time, an intuitive graphical interface makes it easy to operate without specially trained personnel. Users can customize multiple sterilization procedures, such as sterilization temperature, time, and dispensing temperature.

Operating mode

It has 2 main working modes and 2 additional modes to choose from, and the parameters can be set by yourself.

• Standard mode: Prepare standard medium, or high sensitivity medium. Sterilization temperature/time and dispensing time can be set.
• Chocolate Agar Mode: A special 2-step preparation procedure for preparing complex media. After one sterilization, nutrients such as blood may be added through the feeding port, and then the temperature is raised twice.
• Water bath mode: Dissolve the medium at 30 – 80 °C before formal sterilization. Glassware can be placed in the sterilizer and the liquid in the glassware can be heated in a water bath.
• Sterilization mode: When the sterilization mode is enabled, it can be used as a common table sterilizer to sterilize a small number of test tubes, flasks and other glassware.

Main function:

• Medium sterilization
• Highly safe operation
• Rapid heating
• Reliable sterilization
• Rapid cooling
• Simple dispensing
• Sterilization data record

Key Components Origin

• Siemens PLC (Germany)
• Solenoid valves (Italy )
• Stirrer motor (Spain or Japan)
• Pressure sensor (Switzerland)
• Stirrer bar (Japan)

Safety

• Unique lid lock design, dual control of temperature and pressure.
• When temperature higher than 80°C and pressure higher than 50 mbar, the outer cover cannot be opened and automatically locked;
• When temperature higher than 50°C and pressure higher than 50 mbar, the upper cover cannot be opened, and the automatic lock ensures that the cover will not accidentally open during operation;
• Over-temperature protection 130°C, when the temperature exceeds the set temperature by 2.5°C, it will automatically warn, and the power will be cut off automatically if the temperature exceeds the temperature. The open pressure is 1.7bar safely and the built-in safety alarm will not accidentally hurt the operator.
• Pressure container certificated.

Technical parameters

Model	MDP-12	MDP-30
Capacity	12L, cavity 18L	30L, cavity 45L
Cavity size	300mmx260mm (D*H)	300mmX640mm
Bucket size	260mmx222mm (D*H)	260mmX 600mm
Sterilization temp.	70 ° C -130 ° C, design temp. 140 ° C	70 ° C -130 ° C, design temp. 140 ° C
Dispensing temp.	25 ° C -80 ° C	25 ° C -80 ° C
Water bath temp.	30 ° C -80 ° C	30 ° C -80 ° C
Max working pressure	2.5 bar	2.5bar
Design pressure	4 bar	4bar
Cavity sterilized water	Deionized pure water Auto water supplement (pressure not less than 1bar) high and low water level alarm
Cooling water port	2’’, diameter 12 pagoda joint
Circulating water	Tap water (pressure not less than 1bar)
Drainage port	2’’, diameter 12 pagoda joint
Temperature accuracy	0.1 ° C	0.1 ° C
Temperature offset	0.5 ° C	0.5 ° C
Time setting accuracy	1 minute	1 minute
Sterilization pot material	1.4301/1.4305 similar to SS316	1.4301/1.4305 similar to SS316
Dispense port	2 pcs, can adapt to a variety of sub-assembly requirements one of which can also be used for aseptic addition of materials
Dispensing hose	ID 6mm, thickness 2mm	ID 6mm, thickness 2mm
Material feeding port	Diameter 32mm	Diameter 32mm
Stirring	powerful magnetic stirring 120 to 240 rpm adjustable	powerful magnetic stirring 0 to 120 rpm adjustable
Pressure supplement	Complementary pressure water cooling system, maintain tank pressure when rapidly temperature cool down
Heating power	3.6 KW	6.6 KW
Power supply	AC 220-240V, 50/60Hz, 20A	AC 3p 380-420V, 50/60Hz, 32A
Dimensions	550*700*545 (L*W*H) mm	550*700*975 (L*W*H) mm
Packing size	1170*870*810 (L*W*H) mm	1170*870*1230 (L*W*H) mm
Weight	111 kg / 160kg	135kg / 175kg

Product Gallery

Customer Site